Slim wall-mounted home battery
More energy.
Less floor space.
PowerGlee 5 brings 5.12kWh of LiFePO4 storage, smart protection and inverter communication to a slim wall-mounted indoor enclosure.
Residential fit
Wall-mounted storage for compact utility spaces.
The slim enclosure keeps the floor clear and gives a home energy system a more integrated appearance. At 164mm deep, PowerGlee 5 suits protected indoor locations where a rack or floor-standing cabinet would occupy valuable space.
- 51.2V 100Ah LiFePO4 battery
- 500 × 448 × 164mm enclosure
- Indoor wall-mounted installation

Compact energy
5.12kWh in a clean, serviceable enclosure.
The battery combines prismatic LiFePO4 cells, a JK100 BMS and active balancing in one wall-mounted package. A top service area keeps the main power and communication interfaces accessible to qualified installers.
- 5.12kWh nominal energy
- JKBMS JK100 with active balancing
- Passive, fanless thermal design

Integrated connections
Communication and protection arranged for commissioning.
PowerGlee 5 supports CAN, RS485 and RS232 communication alongside optional Wi-Fi monitoring. Closed-loop operation requires the correct inverter protocol, firmware and battery settings to be selected during commissioning.
- CAN, RS485 and RS232 communication
- Optional Wi-Fi monitoring
- Integrated circuit protection and accessible DC terminals

Secure mounting
Designed to sit close to the wall.
The reinforced rear mounting structure supports a tidy installation while side handles assist controlled positioning. Wall condition, fasteners, clearances and service access must be assessed by the installer for the full 50kg battery weight.
- Reinforced rear mounting plate
- Integrated side handles for installation handling
- 50kg battery weight requires suitable structural support

Plan the wall
Slim dimensions with room for safe service access.
Mechanical planning should allow space above the battery for cables and commissioning, plus the clearances required by the installation manual. The wall structure must support both the static load and installation handling.
- 500mm height and 448mm width
- 164mm enclosure depth
- Confirm cable routes and service clearances before mounting

Where it fits
Home battery storage without giving up floor space.
PowerGlee 5 is designed for compact residential installations where a wall-mounted battery is easier to integrate than a floor cabinet or equipment rack. Its slim enclosure supports solar self-consumption, essential-load backup and staged capacity expansion.
Buyer’s guide
Sizing a compact wall-mounted home battery.
A 5.12kWh wall battery is a practical starting point for selected household loads. Before choosing the number of modules, calculate the energy required through the desired backup period and confirm that the wall, inverter and electrical design suit the installation.
Prioritize the loads
Refrigeration, lighting, communications and selected outlets often form an essential-load group. Use actual wattage and operating time to estimate the kWh required.
Check power and runtime separately
PowerGlee 5 is rated for 5.12kW continuous output and 5.12kWh nominal energy. The similar numbers represent different quantities and should not be used interchangeably.
Verify the mounting location
Confirm wall structure, clearances, indoor environmental limits, cable routing and service access. If expansion is likely, reserve wall area and electrical capacity for additional modules.
Technical details
The numbers behind the system.
Core specifications for system planning. Confirm inverter settings and final configuration with your installer before commissioning.
- Model
- GP-PW1-5K
- Chemistry
- Prismatic LiFePO4, 16S1P
- Voltage / capacity
- 51.2V / 100Ah
- Nominal energy
- 5.12kWh
- Continuous / peak current
- 100A / 130A for 25 seconds
- Continuous / peak output
- 5.12kW / 6.66kW
- Cycle life
- 6,000+ cycles to 70% EOL
- BMS
- JKBMS JK100
- Communication
- CAN, RS485, RS232, Wi-Fi, dry contact
- Parallel connection
- Up to 16 units / 81.92kWh
- Dimensions
- 500 × 448 × 164mm
- Environment
- IP21 indoor; wall-mounted
Solar battery knowledge
What to know before installing a wall battery.
Wall-mounted does not mean plug-and-play
A residential solar battery remains part of a DC power system. It requires compatible inverter settings, correct isolation and overcurrent protection, suitable conductors and professional commissioning.
Smart BMS communication has a specific role
CAN and RS485 can share operating limits and status with a compatible inverter. Wi-Fi or Bluetooth may support monitoring and setup, but neither replaces the primary battery-to-inverter control link.
How a 5kWh system can grow
PowerGlee 5 supports up to 16 parallel units for 81.92kWh nominal capacity. Expansion should be planned around approved communication, balanced cabling, protection and the inverter’s total supported battery current.
A precise fit
A 5kWh wall battery for modern home solar.
PowerGlee 5 is tailored to homeowners searching for a 5.12kWh wall-mounted home battery, a 51.2V 100Ah solar battery or a slim LiFePO4 battery for residential backup.
Its compact powerwall-style format, smart BMS and CAN/RS485 interfaces make it suitable for solar self-consumption, 48V inverter systems and expandable home energy storage where floor space is limited.
Plan your system
Tell us what you want to power.
Share your inverter model, available space and target backup time. Our team can help you identify the right battery configuration.
Discuss your project